奇麗浴缸翻新程序 The Reglazing Steps
  • Inspect surface for defects(chips or cracks) and type of porcelain.
    檢查翻新表面之類別及破損程度。
  • Clean surface with industrial cleaners to remove soap, dirt, scale, water deposits and oil.
    Repair defects in surface. Smooth and level out the surface.
    Fill in chips and holes with Glass-white filler.
    三種清潔程序:
    用奇麗不同的強力化學清潔劑將表面一切之肥皂漬,油漬污漬清除及消毒。
    起玻璃膠邊後,用特別填灰把缸邊填平,乾後才噴漆,底油及面油乾後邊會自動黏合,不須重新做玻璃膠邊,美觀耐用。
    用填灰填平將破損地方修好,表面之凹凸處填滿及將表面弄平。
  • Cover surrounding area with paper. To protect areas around the fixtures and the rest of the room from the glaze.
    用紙將附近之所有表面封好,以免在進行翻新過程中弄污。
    在缸底重新作防滑處理。
  • Prepare top coats for spraying.
    開始準備面油。

  • Apply six coats of the chemical bonding base coat to the unit to ensure adhesive of the topcoats.
    在表面噴上六層油,確保油漆持久及不會剝落。
  • Apply four coats of the custom coloured top coat for shine and brilliance.
    在底油加上四層經閣下挑選調配的顏色面油,使表面回復磁質光澤。
    Either bake out surface and same day after eight hours or dry naturally and use the next day.
    待面油乾固二十四小時,翻新潔具便可使用。

Three years guarantee against natural chip, peel, flake or colour loss.Average wear out period is eight years.
處理後之潔具表面,在正常情況下使用,使証三年內不會褪色及剝落或龜裂,適當護理之翻新潔具平均使用期約八年之久。